How To Prevent And Eliminate The Fault Of Conveyor Belt Deviation?

Find here details of Side Flexing Belt on our website.

Conveyor belt deviation is a common problem encountered during the use of the conveyor, and it is also a problem for the customer to operate at the beginning of the period.

Side Flexing Belt

How to prevent and eliminate the fault of conveyor belt deviation? Plastic Modular Roller Top Belt Factory would like to share with you.

First, the prevention measures of conveyor belt deviation.

(1) Improve the quality of installation;

(2) Improve the quality of the conveyor belt joints;

(3) Strengthen inspection and maintenance;

(4) Ensure that the loading is not biased;

(5) Ensure that the cleaning device is normal.

Second, the on-site processing method of conveyor belt deviation.

(1) Automatic drag roller adjustment: When the conveyor belt has a small deviation range, the centering roller can be installed at the deviation of the conveyor belt.

(2) Appropriate tension adjustment: When the conveyor belt runs away from left to right, the direction is not regular, indicating that the conveyor belt is too loose, and the tensioning device can be properly adjusted to eliminate the deviation.

(3) One-side vertical roller adjustment: The conveyor belt always runs to one side, and several vertical rollers can be installed in the range to reset the tape.

(4) Adjust the roller to adjust the deviation: the conveyor belt runs off at the roller, check whether the roller is abnormal or swaying, adjust the drum to the horizontal position to rotate normally, and eliminate the deviation.

(5) Correct the adjustment of the conveyor belt joint; the conveyor belt always runs in one direction, and the maximum deviation is at the joint, which can correct the conveyor belt joint and the conveyor belt center line to eliminate the deviation.

(6) Adjusting the height of the dragging roller: The conveyor belt has a deviation direction and a certain distance, and can be in the opposite direction of the opposite side of the high drag roller to eliminate the deviation.

(7) Adjusting the adjustment of the drag roller: The conveyor belt has a certain deviation direction. It is found that the middle line of the drag roller is not perpendicular to the center line of the conveyor belt, and the drag roller can be adjusted to eliminate the deviation.

(8) Elimination of appendages: The conveyor belt does not change its deviation point. It is found that the rollers and rollers are attached with appendages, so they must be removed to eliminate the deviation.

(9) Correction of feeding deviation: the tape is lightly loaded and not biased, and the heavy load is biased. The weight and position of the feeding material can be adjusted to eliminate the deviation.

(10) Correction bracket adjustment: The conveyor belt will be deflected, the position is fixed, and the deviation will be severe. The horizontal and verticality of the bracket can be adjusted to eliminate the deviation.

We have Side Flexing Modular Belt. If you want to learn more information about it, feel free to contact us.